Fitment on my 313s 18"

[Utah135is]

I just purchased a stock 2013 135is and I'm wondering what size spacers will make my fitment look better? Any experience or pics?

[dtla1]

I think 10MM is pretty common. From what I remember, the 313 and 261 have the same specs so should be the same for you.

[asbrr]

At stock ride height, 10mm with stock tire size should be fine. Buy the right spacers that preserve hub-centric fitment (I've used BMS spacers that were designed correctly).

If you lower the car and go to say 225/255 tire size, you will probably get some rub on the rear bumper by the joint where the bumper meets the fender.

[swunder]

Can anyone recommend good 10mm spacers? I'm interested for my own 135is/313's as well, all stock.

[Esteban]

Originally Posted by dtla1

From what I remember, the 313 and 261 have the same specs so should be the same for you.

Yes, they are the same:

f 7.5x18 ET49
r 8.5x18 ET52

[asbrr]

Originally Posted by swunder

Can anyone recommend good 10mm spacers? I'm interested for my own 135is/313's as well, all stock.

I just did, look above. The BMS spacers are designed to work with and keep the stock hubcentric configuration..