|
|
|
05-03-2018, 11:50 AM | #1 |
Private
11
Rep 82
Posts
Drives: 135i
Join Date: Mar 2014
Location: Vancouver, BC
|
Car won’t start
So I installed the precision raceworks ignition kit, kit is great....car ran fantastic and I have no complaints. All the sudden the car just died. Turns out when I installed the leads for the coils I pinched the 3 cables and they shorted out to each other after the engine got warm and melted through the heat shrink.
Car will crank over but no start, pulled codes from MHD and one code won’t go away. I disconnected all the ignition leads to isolate but code stays 2F8B - Relay, ignition and injectors, supply voltage, ignition: short circuit to ground Searched the code by got nothing. Did I destroy my DME?
__________________
2011 135 w/ DCT + Some Things
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|