|
|
|
02-09-2022, 06:51 PM | #1 |
Private
9
Rep 56
Posts |
Stock style 264 wheels up front
If anyone was wondering, you can fit a set of rear 264's up front with a 12.5 mm spacer. This allows you to have a square setup with a little fender rolling.
|
06-08-2022, 03:50 PM | #3 |
Private
9
Rep 56
Posts |
Joseg0715 I was running stock suspension so I was limited to about -.8 degrees of negative camber. (removing the strut tower guides and sliding the strut as far inward as possible is the only way to achieve more camber on the stock suspension.)
I am running 255 michelin PS4S on all corners |
Appreciate
0
|
06-08-2022, 03:53 PM | #4 |
Private
9
Rep 56
Posts |
I have upgraded to the BCracing BR series coilovers and I had to use a 15MM spacer up front to clear the beefier diameter of these coilovers compared to the stock suspension. I have the camber maxed out on the coilovers but haven't gotten an alignment yet so I dont know the exact numbers but havent experienced any rubbing yet up front which is great. The fitment is also perfect, I couldn't be happier with the setup.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|