|
|
|
02-21-2011, 08:17 PM | #1 |
Private
12
Rep 83
Posts |
Bluetooth install or upgrade?
My car did not come with the bluetooth phone installed, but the prep kit is listed on the vin spec sheet. I have all the buttons on my steering wheel and dash. What do I need to buy or do to have this feature activated?
|
02-23-2011, 12:38 AM | #2 |
I want to drive a Zamboni
1131
Rep 5,557
Posts
Drives: 13 E93 M3 18 F80 M3 16 K71
Join Date: Mar 2006
Location: Monte Sereno, CA
|
lots of equipments to buy do a search on forum.
__________________
18 F80 Imola Red 6MT
16 K71 F800GT Montego Blue 13 E93 M3 Melbourne Red 2000 E46,2006 E90,09 E82,13 E93 328i,14 F30 335i,18 F80 M3 My next vehicle would be a Zamboni |
Appreciate
0
|
02-24-2011, 12:24 PM | #4 |
Brigadier General
368
Rep 3,547
Posts |
You could try to find the parts required on RealOEM. That would not be foolproof but would give you some information.
You could also consider a "Parrott" kit if all you need is bluetooth. They have several levels with the top level using the buttons on your steering wheel. You could also install a BMW Portable GPS which has bluetooth capability. Jim
__________________
128i Convertible, MT, Alpine White, Black Top, Taupe Leatherette, Walnut, Sport
Ordered 5/22/09, Completed 6/4/09, At Port 6/9/09, On the Georgia Highway 6/13/09, Ship Arrived Charleston 6/24/09 at 10pm, PCD 7/21/09 |
Appreciate
0
|
02-24-2011, 04:43 PM | #6 |
Private
12
Rep 83
Posts |
okay i found the parrot kit and others like it. the big problem is 1series uses fiber optics and none of these kits work with fiber optics (correct me if im wrong)
has anyone found a plug and play kit for the 1 series??? |
Appreciate
0
|
02-24-2011, 04:50 PM | #7 |
Private
12
Rep 83
Posts |
it seems as if you have the prep kit you need:
A Bluetooth aerial B Hands-free microphone C Universal charger/hands-free electronic control module (ULF) D ULF holder E Speed nut (4x) F Hexagonal nut (4x) G Cable ties (10x) H Cable tie holder (2x) I Eject box J Telephone trim K Rear axle differential heat insulation with out prep kit you need: A Wiring harness B Bluetooth aerial C Hands-free microphone D Universal charger/hands-free electronic control module (ULF) E ULF holder F Roof aerial (cars without SA 606 or SA 609 only, not supplied in the retrofit kit) G Rear axle differential heat insulation H Speed nut (4x) I Hexagonal nut (4x) J Miniature connector K Cable holder (2x) L Cable tie (30x) M Eject box N Telephone trim O Fusible link 10 A P Template (for cars without a roof function centre only, not supplied in the retrofit kit) Q Hands-free microphone trim (2x, dependent on colour, for cars without roof function centre only) R Installation frame (for cars without roof function centre only) S Plug connector holder T Speed nut (only for cars without SA 606 or SA 609) OR is there a after market kit that is cheaper and easier (if you have prep kit) |
Appreciate
0
|
02-24-2011, 04:51 PM | #8 |
Private
12
Rep 83
Posts |
there is a big post on this at
http://www.e90post.com/forums/showthread.php?t=3540 but, our car is different with fiber optics... IS there anyone out there that has done their homework on this? |
Appreciate
0
|
03-06-2011, 08:39 PM | #9 |
Second Lieutenant
219
Rep 275
Posts |
There is a product called the MoBridge from DICE electronics that offers both Bluetooth for telephone and audio and Ipod functionality.
Ive never seen a write up from anyone with it. |
Appreciate
0
|
03-06-2011, 09:31 PM | #10 |
Colonel
166
Rep 2,926
Posts |
I can vouch for DICE electronics. I believe they have a store here in Atlanta and they are very friendly and their products are top of the line and easy installs. Had an iPod adapter that I installed in my 99' 323i
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|