Sponsored by The Tire Rack

[guido1er]

i am interested in the v715's on a lemans blue 135, i have only seen eas's white car so far with these, and would really would like to get an idea of how they look on the lemans, i also cant decide if i want black, or silver wheels for my car! any help would be much appreciated!!!

[guido1er]

anyone?

[MrBimmer]

Are u talking about these?

http://www.europeanautosource.com/in...67_203_205_289

[sootyvrs]

These are relatively new. I've not heard of anyone who has purchased a set for the 1 Series. Perhaps e-mail VMR to see if they have any pics?

[guido1er]

mrbimmer, no those are v710's, and csl's they are the right company just different type of wheel they make, bue eas does have them on their site.

sootyvrs, the only picture i have seen is eas's 1 with them, but i did not know they are new.

if anyone else can contribute it would be much appreciated.

[david @ eas]

Originally Posted by guido1er

i am interested in the v715's on a lemans blue 135, i have only seen eas's white car so far with these, and would really would like to get an idea of how they look on the lemans, i also cant decide if i want black, or silver wheels for my car! any help would be much appreciated!!!

Actually that's not our 1 series. Our 1 series is black with CSL wheels. You're probably thinking of EuroBahn's 1 series which, unfortunately, I don't have a picture of any longer. The V715s will be a tight fit to be honest. The offset up front is a ET38 in which I really wouldn't recommend anything more aggressive than a ET40 up front.

Yes for those of you who really understand offsets, it's only a 2mm difference, but I wouldn't want rubbing issues up front to occur. Guido1er: If you understand that you'll probably rub a bit, and you're ok with that, regardless, we can get you those wheels no problem. I just want to make sure you're good to go

[guido1er]

o i am sorry i thought it was yours, i know it was white. i do know this is an aggressive setup on the 1, but i am pretty open to rolling or trimming since the best looking wheels dont usually fit our cars. only problem is i dont know what color wheel in this design will look best on my car since it seems that there is only one other car with these wheels.

photoshop anyone?

[david @ eas]

Originally Posted by guido1er

o i am sorry i thought it was yours, i know it was white. i do know this is an aggressive setup on the 1, but i am pretty open to rolling or trimming since the best looking wheels dont usually fit our cars. only problem is i dont know what color wheel in this design will look best on my car since it seems that there is only one other car with these wheels.

photoshop anyone?

Post up a picture of your car (preferably a side shot) and I'll see if Anthony can quickly chop it

[guido1er]

ok

[guido1er]

picture is really big i couldnt make it smaller, well i cant figure out how to im using my fiances mac book and dont really know how to use it

[guido1er]

can anyone photoshop this?

[jibaholic101]

side shot would be much easier to chop, but the quality is kind of bad so it will be hard as it is

[guido1er]

ill see what i can do to get a different pic up

[guido1er]

jurrian i also noticed on your site that these are available in et40 et45 staggered wouldnt that be a more appropriate fit?
also any input anyone can help with color to use on lemans would be appreciated!

[david @ eas]

Originally Posted by guido1er

jurrian i also noticed on your site that these are available in et40 et45 staggered wouldnt that be a more appropriate fit?
also any input anyone can help with color to use on lemans would be appreciated!

There might be a typo on the website. V715's are ET38 fronts and ET45 rears only.

It would be an ok fit for it, but it's just too aggressive to be honest.

[guido1er]

o ok i just noticed if you go under 19in wheels on your site there are a few different offset combinations for these.

[VMRWheels]

Here are some shots of EuroBanhs 135i. The +38 and +45 was definitely a real challenge to fit even with 225's and 245's. Fender rolling and fender liner cutting was necessary.

-Charles@VMRWheels

[guido1er]

vmr are these available in other offsets?

[VMRWheels]

Originally Posted by guido1er

vmr are these available in other offsets?

8.5 +38 front and 9.5 +45 rear would be the highest offset in both widths that we offer for the V715.

We do happen to have have our newer V713 in a 19x8.5 +45 offset.



-Charles@VMRWheels

[1013mm]

Originally Posted by VMRWheels

8.5 +38 front and 9.5 +45 rear would be the highest offset in both widths that we offer for the V715.

We do happen to have have our newer V713 in a 19x8.5 +45 offset.



-Charles@VMRWheels

So this is a squared setup?

[guido1er]

eh not to crazy about v713 im looking for something in a mesh design, with a lip, and a staggered setup

[VMRWheels]

Originally Posted by jzhang

So this is a squared setup?

8.5 +45 and 9.5 +45. Both required some fender rolling.

-Charles@VMRWheels