|
|
|
09-29-2020, 02:49 AM | #1 |
Enlisted Member
7
Rep 34
Posts |
Amplifier Logic7 power wire connection SOLVED!
So it's been bugging me where to connect the damn power wire since I retrofitted the logic7 amp back in March this year. I read a bunch of threads but no luck since everybody is saying to just connect to the main battery(which is really not safe to do)
So here it is! There's 1 additional wire you have to plug into the black connector to route all the way to the grey connector in the back of the fuze box. Pictures and Video below On the black connector, power wire goes to #2 same with the additional wire then on the grey connector, plug it the right above the thin red and black wire. Also, don't forget to get a 20Amp fuze to connect to #15 on the fuze box. https://youtu.be/hYOYCsQE1gE Last edited by 1st2nd8th; 09-29-2020 at 02:54 AM.. |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|