Help - Bimmerlabs Tune

[same82]

Hey,

I was loading a new bimmerlabs tune when my computer decided to crash and disrupt the upload.

It's for a e82 125i and I was changing it to the 130i tune.

Now my car only cranks but doesn't start, and is displaying this message when I try to upload the tune again:

[MULTIFLASH]
MF_FG_NUMMER=
MF_PABD=12msv80.ipo
MF_PSGBD=12MSV80.prg
MF_SG_ADR=12
MF_NAAB_DATEI=
MF_PROGRAMM_DATEI=
MF_DATEN_DATEI=MSV80_125i_to_130i_EU_PowClass00.0d a
MF_DIAGNOSEPROTOKOLL=
HW interface activted.
PABD set.
P-SGBD set.
ECU-Address set.
Data and/or program and/or NAAB file set.
INFO000=Error: Error 503: Wrong program version DS: I2, ECU: M10S
Data will be programmed.
INFO001=Error: Error 211: Error on flash programming!
INFO002=Error: Error 2089: PABD 05MSV80 Programmieren 2544 switching programming mode failed 12MSV80, DIAGNOSE_MODE (ECUPM): ERROR_ECU_SECURITY_ACCESS_DENIED__SECURITY_ACCESS_ REQUESTED
INFO003=Error: Error 2086: PABD 05MSV80 Programmieren 3344 Signature check failed 12MSV80, FLASH_SIGNATUR_PRUEFEN (Daten;64): ERROR_FLASH_SIGNATURE_CHECK
INFO004=Error: Error 2086: Error COAPI2.CPP coapiRunCabd 6 Signature check failed SG_PROGRAMMIEREN
INFO005=Error: Error 2086: Error COAPIKF.CPP coapiKfProgSgDevelop 4 Signature check failed
ERG=Programming not ok. Fatal Error
Batch mode ended



Can someone let me know if they can help? I really hope I didn't brick my DME. Or am I missing something really simple.

[same82]

Hi, got this solved, feel free to delete the thread. Thanks

[summitp]

Care to share how you were able to resolve this?

Thanks.