OEM M3 Control Arms 6-pieces

[omgzirra_exe]

BIMMERPOST / Classifieds

Asking Price:

Sold

Or Best Offer

Item Interest

OEM M3 Front Suspension Arms off my e92 m3.

price: $350 OBO
Location: Long Beach, CA



Parts included:

• M3 Thrust Arm x2
• M3 Tie Rod x2
• M3 Toe Arms x2

these have 125k miles upon removal.

I suggest upgrading the M3 Thrust Arms with the GAS Monoball Ball joint.

https://germanautosolutions.com/stor...3-monoball-v2/

pretty much all you need if you plan on upgrading your front suspension... if you do install the GAS Monoball, it will drastically change the entire feel of the front suspension.

I will not split these parts, I have no use for them.

current TRW Control Arms are no longer made the same way as OEM.
so don't bother saying you can get a new OEM 4 - piece kit for less than $300.

new OEM 4 piece from FCP is $760

shipping is $60 lower 48.

payment accepted: PayPal Goods and Services only, cash, venmo, zelle

[iDontRemember]

current TRW Control Arms are no longer made the same way as OEM.

any intel on what's changed?

[omgzirra_exe]

Originally Posted by iDontRemember

current TRW Control Arms are no longer made the same way as OEM.

any intel on what's changed?

TRW aftermarket control arms for the E90-M3 and E82-1M series have, until just recently, been production BMW arms made in Germany, with the BMW markings ground off. This meant that they were the exact same arms as what was installed at the factory but at a lower cost. TRW has currently shifted production of these aftermarket arms to Malaysia, which means that they are no longer the same as the OEM BMW-installed arms.

[omgzirra_exe]

sold