BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 
 

Post Reply
 
Thread Tools
      10-12-2021, 01:13 AM   #1
lvfb
Private First Class
55
Rep
149
Posts

Drives: BMW 128i cabrio
Join Date: Aug 2020
Location: Las Vegas

iTrader: (0)

[2009 128i convertible e88 n51] How to remove the rear seats both the bench lower sea

For the bench part of the seat just stuff your hand down there and yank up on both sides. Should pop out pretty easily


For upper part of the seats in the rear, unscrew the two bolts at the bottom shown here in green

[the circle and arrow at the top of the picture is to show how the seat is "hung" on this metal bracket]


Now remove the head rest by giving them an upper cut while holding the push tab in. WARNING head rest may go flying.


Now comes the annoying STUPID FUCKING DUMB WAY BMW WANTS YOU TO DO THIS AND MADE IT THIS WAY:


use very small flat head screw drivers and go inside the hole where the head rest post or legs were. there will be 2 clips inside each hole and you have to somehow grip the top of this plastic release and pull them into the middle. you need to do this for both holes on each side [so 4 holes in total] once you have pulled them in push up on each side of the plastic so they dont just lock back in place. they should slide up about 6ish inch and then you can pull the seat straight upwards to get it out of the way.


This tutorial is prob hard to follow so here is a professional one i found


http://www.mods4cars.com/sms/db/smar...all_1er/en.php
Attached Images
   
Appreciate 1
wayman519111.00
      03-25-2023, 07:38 PM   #2
MGalo
New Member
17
Rep
25
Posts

Drives: '11 E88 135i, ToyotaMR2Spyder
Join Date: Mar 2021
Location: Indy

iTrader: (0)

THANK YOU for this thread AND link! Without this info...
Appreciate 0
      03-26-2023, 12:23 AM   #3
lvfb
Private First Class
55
Rep
149
Posts

Drives: BMW 128i cabrio
Join Date: Aug 2020
Location: Las Vegas

iTrader: (0)

Quote:
Originally Posted by MGalo View Post
THANK YOU for this thread AND link! Without this info...
Thats what were all here for brother! ive gotten pretty damn good at e88 stuff. let me know if you have any questions
Appreciate 1
GoRomeo1800.50
      03-29-2023, 04:20 PM   #4
MGalo
New Member
17
Rep
25
Posts

Drives: '11 E88 135i, ToyotaMR2Spyder
Join Date: Mar 2021
Location: Indy

iTrader: (0)

Quote:
Originally Posted by lvfb View Post
Thats what were all here for brother! ive gotten pretty damn good at e88 stuff. let me know if you have any questions
Oh, I understand and appreciate the knowledge/experience shared on forums. I figured there was something here, and your post was a goldmine! I was in the process of swapping my base, Lemon Boston seats for Terracotta Sport types. I found the full interior at a place in GA, and they accepted my offer. After removing the rear seats rather easily, thanks to your post/link, I drove down from Indianapolis on Sunday, woke up Monday and drove to the location. After getting some "little" electrical connector troubles figured out, I got the front seats and door cards(door trim) installed, and loaded the back seats and lateral trim(gotta love BMW's parts names) in the rear seat area. I drove home, and Tuesday, a grandson helped me put the rear seat goodies in. The sport seats are fantastic!!! Now I'll be able to drive the twisties without having to hang on for dear life! And the seats have all power adjustments in working order, so on those cold Indiana days, the "bun warmers" will be able to do their job!

Thank you again, for your words and pics, PLUS the link, which did indeed make it a little clearer. And YES, those little catches in the headrest tubes are
a royal pain!
Appreciate 1
wayman519111.00
      03-29-2023, 09:54 PM   #5
lvfb
Private First Class
55
Rep
149
Posts

Drives: BMW 128i cabrio
Join Date: Aug 2020
Location: Las Vegas

iTrader: (0)

Quote:
Originally Posted by MGalo View Post
Oh, I understand and appreciate the knowledge/experience shared on forums. I figured there was something here, and your post was a goldmine! I was in the process of swapping my base, Lemon Boston seats for Terracotta Sport types. I found the full interior at a place in GA, and they accepted my offer. After removing the rear seats rather easily, thanks to your post/link, I drove down from Indianapolis on Sunday, woke up Monday and drove to the location. After getting some "little" electrical connector troubles figured out, I got the front seats and door cards(door trim) installed, and loaded the back seats and lateral trim(gotta love BMW's parts names) in the rear seat area. I drove home, and Tuesday, a grandson helped me put the rear seat goodies in. The sport seats are fantastic!!! Now I'll be able to drive the twisties without having to hang on for dear life! And the seats have all power adjustments in working order, so on those cold Indiana days, the "bun warmers" will be able to do their job!

Thank you again, for your words and pics, PLUS the link, which did indeed make it a little clearer. And YES, those little catches in the headrest tubes are
a royal pain!
HELL YA DUDE! i love when people are able to get a job done from a single post and not have piece meal from 6 different post!

feel free to share some pics of your swap!
Appreciate 0
      08-29-2025, 01:42 PM   #6
fordu2nv
New Member
2
Rep
10
Posts

Drives: 2011 BMW 128i
Join Date: Aug 2025
Location: Texas

iTrader: (0)

Kudos to you

I had to register and give you kudos on the post. LIFE SAVER!!!!!!!!!!!!!!!!!!

I was trying to get to the convertible top module.

Last edited by fordu2nv; 08-29-2025 at 01:43 PM.. Reason: add extra wording.
Appreciate 0
      09-06-2025, 07:01 PM   #7
lvfb
Private First Class
55
Rep
149
Posts

Drives: BMW 128i cabrio
Join Date: Aug 2020
Location: Las Vegas

iTrader: (0)

Quote:
Originally Posted by fordu2nv View Post
I had to register and give you kudos on the post. LIFE SAVER!!!!!!!!!!!!!!!!!!

I was trying to get to the convertible top module.
Thanks man! glad i could help.

Sadly this forum isnt the most help full with people so i always try to solve my own problems and put step by step for others who have issues
Appreciate 1
GoRomeo1800.50
      10-11-2025, 03:35 PM   #8
ExpertGeek
Registered
2
Rep
1
Posts

Drives: BMW 135i Conv
Join Date: Sep 2024
Location: Bay Area

iTrader: (0)

Quote:
Originally Posted by lvfb View Post
Thanks man! glad i could help.

Sadly this forum isnt the most help full with people so i always try to solve my own problems and put step by step for others who have issues
Many thanks for the post!!! I've had my '08 E88 for almost 15 years and finally had to pull the rear seat for the first time, what a pain! I had a similar experience with the rear headrests in my E500 (W211). The Mercedes power retract mechanism over complicated what should have been a simple rear seat removal.

Just had a new Robbins top installed this summer, rear glass separation issue due to age. Glad she's back on the road again after being garaged for almost a year.
Appreciate 1
GoRomeo1800.50
      10-11-2025, 05:15 PM   #9
GoRomeo
Brigadier General
GoRomeo's Avatar
United_States
1801
Rep
4,667
Posts

Drives: 330i, 135i
Join Date: Feb 2006
Location: San Diego CA

iTrader: (0)

Garage List
2008 BMW 135i  [6.33]
2006 330i  [6.75]
Quote:
Originally Posted by ExpertGeek View Post
Many thanks for the post!!! I've had my '08 E88 for almost 15 years and finally had to pull the rear seat for the first time, what a pain! I had a similar experience with the rear headrests in my E500 (W211). The Mercedes power retract mechanism over complicated what should have been a simple rear seat removal.

Just had a new Robbins top installed this summer, rear glass separation issue due to age. Glad she's back on the road again after being garaged for almost a year.
Is that a like AM top your talking about? I'm curious in case I need to replace my top in the future 🤔. Do you have any pictures you can share?
Appreciate 0
Post Reply

Bookmarks

Tags
128i seat, convertible seat, head rest, headrest, rear seat, remove

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:12 AM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST