Do E92 M3 BBK's fit 1M?

[FRNTHVY]

Hello All,

I am in the market for an upgraded BBK for my 1M. I am looking used and have been looking on the E92 M3 forums. I think I found a set although I wanted to just double check that they are direct bolt on's for the 1M. I am not concerned about wheel clearance.

I feel confident that they are although I wanted to check, thanks!

Sam

[ayao]

Yes, interchangeable.

[FRNTHVY]

Thank you.

Sam

[ayao]

Which one are likely to be going with? ST-40s look to be the best bang for the buck on the used forums at the moment.

[FRNTHVY]

Originally Posted by ayao

Which one are likely to be going with? ST-40s look to be the best bang for the buck on the used forums at the moment.

I was looking and considering many BBK's and they all have their pros and cons. I ended up with a Brembo 380MM GT-R kit with type 3 rotors on all four corners.

Sam

[ayao]

What wheels are you running? I was under the impression that Brembos had the most issues with wheel clearance, even though you mentioned earlier that wheel clearance wasn't particularly an issue with your setup.

[MDORPHN]

I'm running Essex Racing's AP Brakes set-up. It's fantastic.

Neil

[FRNTHVY]

Originally Posted by ayao

What wheels are you running? I was under the impression that Brembos had the most issues with wheel clearance, even though you mentioned earlier that wheel clearance wasn't particularly an issue with your setup.

I have a set of Apex EC7's and was told by Apex these would clear. I also had a set of HRE's build around the Brembo GT profile.

You are correct though, Brembo's do present the biggest clearance challenge.

Sam

[HP Autosport]

direct swap

[HP Autosport]

Originally Posted by MDORPHN

I'm running Essex Racing's AP Brakes set-up. It's fantastic.

Neil

The best track/race setup one can have!