|
|
|
06-26-2020, 01:01 PM | #1 |
Registered
0
Rep 3
Posts |
BBS SR wheels on a 128i
Hi all I am looking to buy some BBS RS Wheels off some one and the Specs are 18x8
5x120 Et32 the current tires are 245/45/18 My 128 has Upgraded 135i BMW performance 6 pistons on the front Will i need to buy an hub centric rings for these or do you think they will be plug and ride? |
06-26-2020, 04:24 PM | #2 |
Major
543
Rep 1,233
Posts |
What car were they from? If from a BMW, then the hubs should be the same size and no need for rings. The tires are definitely too tall and the wrong circumference so plan to toss/sell those.
The other issue you will have is the offset is way too aggressive - at least 10mm too aggressive for the rear depending on your suspension and tire choice. You will have problems with rubbing.... For reference, stock 18" size is Front: 18x7.5 ET49 215/40/18 Rear: 18x8.5 ET52 245/35/18 As you can see the offsets are quite far from what you are looking at. Use this site to compare "before" and after to understand how this affects fitment: https://www.willtheyfit.com/ |
Appreciate
0
|
06-27-2020, 07:21 PM | #3 |
Captain
776
Rep 992
Posts |
I don't see how 32 mm offset will work with tires that wide. Tire Rack says that the wheel requires rings.
__________________
Official BMWP Whore - BMWP suspension kit w/ M3 arms, BMWP big brake kit, BMWP intake w/Mishimoto tube, BMWP exhaust, BMWP carbon strut brace, BMWP short shifter, and BMWP carbon spoiler. OZ Leggera HLT w/ 245 square setup.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|