|
|
|
10-28-2018, 06:00 PM | #1 |
Major General
898
Rep 6,285
Posts |
FS: F A G Front Wheel Bearings x 2 for E9X M3 or 1M
Long story but thought I'd had a blown bearing, as I was getting vibration turning right when loading up the steering on long sweeping bends. turned out I just had loose control arm nut...
Lots of guys with high mileage vehicles state that replacing the front bearings makes a drastic difference, especially if you do a few track days and run decent camber. My front bearings have done about 50000 kays so should be good for a while yet but for thos eguys with 100000+ kays fresh bearings may help! An easy DIY with only 4 bolts to remove once the wheel is off: Capitalise on my diagnosis error! Price: $500 ($600 delivered from ECS) Location Newcastle NSW |
Post Reply |
Bookmarks |
|
|