>>> HP AUTOWERKS <<< Vorshlag Camber Plates Here!

HP Autosport · 02-16-2011, 07:50 PM

In order to properly use Vorshlag camber plates, you must choose the option below to include Vorshlag upper spring perches that match your strut brand and spring type. Vorshlag camber/caster plates are designed to be compatible with 2.5”, 2.25" and 60mm “coilover” style springs, OEM (stock) style springs and all strut types. We make numerous variations of this plate and accompanying perches to work with your set-up. The Vorshlag upper perches allow us to add a sealed radial bearing that isolates the spherical bearing in the camber plate from radial turning loads of of the strut shaft during steering inputs. This is part of why our plates last the lifetime of the car!

*Compatible with 2.5", 2.25" and 60 mm coilover springs, factory springs, OEM Style Lowering springs and all struts.
*No need to change camber plates when switching from regular springs to coilovers - some companies sell you two totally different camber plates for coilover springs and factory style springs.
*Installs with basic hand tools, no chassis modifications required.
*Plates are designed specifically for BMW E82 & E87 (1 series) and E90 or E92 (3 series) chassis (except E90/E92 M3).
*Caster & Camber are independently adjustable.
*Camber is easily adjustable at the track from the engine compartment with simple (metric) hand tools. No need to reach inside the wheel well with a wrench to tighten.
*The spherical bearing used in the Vorshlag camber plate is the largest used in any BMW camber plate on the market. The result is much better durability and wear characteristics than the undersized bearings used in our competitors' plates.
*Designed for maximum suspension travel (bump travel). More than an inch more strut travel than some of our competitors' designs.
*Alloy steel bearing holder - Tough as a German Tank!
*Aluminum alloy main plate for lighter weight, engraved and fully anodized
*All components plated or anodized for maximum corrosion resistance and long life.
*Vorshlag Upper spring perches required. Coilover perches included in the basic price, but OEM style perches are extra (see "Spring Perch" drop down option menu, below).
*Maximum negative camber setting depends on caster setting, ride height, and is ultimately limited by the strut tower opening on these chassis. The E82/90/92 strut tower hole is more restrictive than previous generation BMWs. *Expect to get -2° to -3.5° max camber, depending on ride height.
*New and improved .25" thick top ring (introduced Dec 2008) for increased clearance between Vorshlag long reach M12x1.5 strut top nut to factory (faux) strut brace. Improved low profile bolt ring for more clearance when used with OEM style perches.

Available now!

Camber plates starts at $525

To order go to: https://hpautosport.com/product/vors...mber-plates-2/

May want to add some thrust sheets to your coilovers while you are in there:

OneThreeFive · 02-23-2011, 10:47 PM

Quote:

Originally Posted by HP Autowerks

In stock and ready to ship!

Free shipping?

OneThreeFive · 02-24-2011, 11:12 AM

Order placed. Thank you Harold!

adrean8j · 02-24-2011, 12:36 PM

Hey guys on your page I didn't see KW V1's listed....what size upper spring perches would one order then?

OneThreeFive · 02-24-2011, 12:45 PM

Quote:

Originally Posted by adrean8j

Hey guys on your page I didn't see KW V1's listed....what size upper spring perches would one order then?

I have the KW v1s. You want the OEM style springs / upper perch.

I already have my tracking number! This has to be some sort of record!

adrean8j · 02-24-2011, 12:58 PM

^^^Good stuff man...I already have HPAutowerks bookmarked so I can pull the trigger in a couple months....

OneThreeFive · 03-13-2011, 09:36 PM

Bump for a quality product. Got these installed last week and the techs specifically mentioned their quality and the ease of install as compared to other brands they work with.

HP Autosport · 03-19-2011, 10:51 AM

Quote:

Originally Posted by OneThreeFive

Bump for a quality product. Got these installed last week and the techs specifically mentioned their quality and the ease of install as compared to other brands they work with.

All Vorshlag for E82/E9x are in stock. Including OEM, Koni, KW and Bilstein style struts, even the hard to find Ohlin coilovers.

lavmugen · 04-25-2011, 03:23 PM

for stock OEM m-sport suspension with E93 Front Sway, what do i choose?

Vorshlag - Camber Plates * OEM Style Springs E82/E9X Non-M Upper Perch (+$35.00)
Vorshlag - Camber Plates Strut Type * OEM E82 E90 (+$25.00)
Vorshlag - Camber Plates Bearing Type * Heavy Duty Double Row Bearing

these correct for otherwise stock suspension? thanks!

HP Autosport · 04-27-2011, 02:37 AM

Quote:

Originally Posted by lavmugen

for stock OEM m-sport suspension with E93 Front Sway, what do i choose?

Vorshlag - Camber Plates * OEM Style Springs E82/E9X Non-M Upper Perch (+$35.00)
Vorshlag - Camber Plates Strut Type * OEM E82 E90 (+$25.00)
Vorshlag - Camber Plates Bearing Type * Heavy Duty Double Row Bearing

these correct for otherwise stock suspension? thanks!

Yes, that is correct.

dcho · 05-16-2011, 08:37 AM

i will be placing a call soon..

lavmugen · 05-23-2011, 12:53 PM

order placed. thanks for your help!

HP Autosport · 07-16-2011, 01:59 AM

Camber plates are back in stock for most OE, KW, Koni, AST and Ohlins applications.

M135 · 08-22-2011, 11:06 AM

For KW V2's which one do I want, the 60MM upper perch?

akak1997 · 09-09-2011, 03:25 AM

Got mine last week! Great Product and super faster shipping!
a side note, it does increase road noise a bit, doesn't bother me, just noticeable.

HP Autosport · 09-23-2011, 05:45 PM

Quote:

Originally Posted by akak1997

Got mine last week! Great Product and super faster shipping!
a side note, it does increase road noise a bit, doesn't bother me, just noticeable.

The performance should outweigh the slight road noise.

HP Autosport · 03-01-2012, 06:34 PM

Stock struts and spring...No problem!

KW's...No problem!

Koni's...No problem!

AST's...No problem!

Ohlins...No problem!

Moton...No problem!

HP Autosport · 03-10-2012, 12:05 AM

Get your Vorshlag camber plates at HP Auotwerks, Inc. Your largest West coast stocking dealer and installer for Vorshlag suspension parts.

We have been selling and installing these on E9x BMW's since 2006, no one on the West coast has a longer history with Vorshlag than we have.

HP Autosport · 07-25-2012, 06:27 PM

We now stock JRZ 1M RS, JRZ 1M RS1, JRZ M3 RS, JRZ M3 RS1 and all none M 135i/335i RS and RS1 Vorshlag camber plates!

HP Autosport · 07-30-2015, 10:30 PM

These are slowly becoming available again. Wait time is down to about 2 weeks.

HP Autosport · 09-06-2015, 11:19 PM

The lead time is only 1-2 days on these excellent plates!

HP Autosport · 12-22-2015, 01:23 PM

bump

02-16-2011, 07:50 PM	#1
HP Autosport Supreme Allied Commander 4038 Rep 55,516 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	Vorshlag Camber Plates For Your 1-Series In order to properly use Vorshlag camber plates, you must choose the option below to include Vorshlag upper spring perches that match your strut brand and spring type. Vorshlag camber/caster plates are designed to be compatible with 2.5”, 2.25" and 60mm “coilover” style springs, OEM (stock) style springs and all strut types. We make numerous variations of this plate and accompanying perches to work with your set-up. The Vorshlag upper perches allow us to add a sealed radial bearing that isolates the spherical bearing in the camber plate from radial turning loads of of the strut shaft during steering inputs. This is part of why our plates last the lifetime of the car! Compatible with 2.5", 2.25" and 60 mm coilover springs, factory springs, OEM Style Lowering springs and all struts. No need to change camber plates when switching from regular springs to coilovers - some companies sell you two totally different camber plates for coilover springs and factory style springs. Installs with basic hand tools, no chassis modifications required. Plates are designed specifically for BMW E82 & E87 (1 series) and E90 or E92 (3 series) chassis (except E90/E92 M3). Caster & Camber are independently adjustable. Camber is easily adjustable at the track from the engine compartment with simple (metric) hand tools. No need to reach inside the wheel well with a wrench to tighten. The spherical bearing used in the Vorshlag camber plate is the largest used in any BMW camber plate on the market. The result is much better durability and wear characteristics than the undersized bearings used in our competitors' plates. Designed for maximum suspension travel (bump travel). More than an inch more strut travel than some of our competitors' designs. Alloy steel bearing holder - Tough as a German Tank! Aluminum alloy main plate for lighter weight, engraved and fully anodized All components plated or anodized for maximum corrosion resistance and long life. Vorshlag Upper spring perches required. Coilover perches included in the basic price, but OEM style perches are extra (see "Spring Perch" drop down option menu, below). Maximum negative camber setting depends on caster setting, ride height, and is ultimately limited by the strut tower opening on these chassis. The E82/90/92 strut tower hole is more restrictive than previous generation BMWs. Expect to get -2° to -3.5° max camber, depending on ride height. New and improved .25" thick top ring (introduced Dec 2008) for increased clearance between Vorshlag long reach M12x1.5 strut top nut to factory (faux) strut brace. Improved low profile bolt ring for more clearance when used with OEM style perches. Available now! Camber plates starts at $525 To order go to: https://hpautosport.com/product/vors...mber-plates-2/ May want to add some thrust sheets to your coilovers while you are in there: Last edited by HP Autosport; 08-09-2023 at 04:53 PM..*
	Appreciate 0 Tweet Quote

02-24-2011, 11:12 AM	#3
OneThreeFive Lieutenant 43 Rep 596 Posts Drives: 2008 E90 M3 Join Date: May 2009 Location: NoVA iTrader: (12) Garage List 2008 BMW M3 \| SOLD [10.00] 1999 BMW M3 \| SOLD [0.00] 2009 BMW 135i \| SOLD [10.00]	Order placed. Thank you Harold!
	Appreciate 0 Quote

03-13-2011, 09:36 PM	#7
OneThreeFive Lieutenant 43 Rep 596 Posts Drives: 2008 E90 M3 Join Date: May 2009 Location: NoVA iTrader: (12) Garage List 2008 BMW M3 \| SOLD [10.00] 1999 BMW M3 \| SOLD [0.00] 2009 BMW 135i \| SOLD [10.00]	Bump for a quality product. Got these installed last week and the techs specifically mentioned their quality and the ease of install as compared to other brands they work with.
	Appreciate 0 Quote

04-25-2011, 03:23 PM	#9
lavmugen Private First Class 19 Rep 150 Posts Drives: 2011 Superman 135i Join Date: Jan 2010 Location: Vancouver, BC iTrader: (0)	for stock OEM m-sport suspension with E93 Front Sway, what do i choose? Vorshlag - Camber Plates * OEM Style Springs E82/E9X Non-M Upper Perch (+$35.00) Vorshlag - Camber Plates Strut Type * OEM E82 E90 (+$25.00) Vorshlag - Camber Plates Bearing Type * Heavy Duty Double Row Bearing these correct for otherwise stock suspension? thanks!
	Appreciate 0 Quote

05-16-2011, 08:37 AM	#11
dcho Captain 36 Rep 947 Posts Drives: SGM 135i Join Date: Jul 2009 Location: Houston iTrader: (0)	i will be placing a call soon..
	Appreciate 0 Quote

05-23-2011, 12:53 PM	#12
lavmugen Private First Class 19 Rep 150 Posts Drives: 2011 Superman 135i Join Date: Jan 2010 Location: Vancouver, BC iTrader: (0)	order placed. thanks for your help!
	Appreciate 0 Quote

07-16-2011, 01:59 AM	#13
HP Autosport Supreme Allied Commander 4038 Rep 55,516 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	Camber plates are back in stock for most OE, KW, Koni, AST and Ohlins applications. Camber plates are back in stock for most OE, KW, Koni, AST and Ohlins applications.
	Appreciate 0 Quote

08-22-2011, 11:06 AM	#14
M135 Professional Rookie 36 Rep 533 Posts Drives: 2016 M4 Join Date: Sep 2007 Location: Earth iTrader: (2) Garage List 2008 BMW 335xi [0.00] 2016 BMW M4 [0.00]	For KW V2's which one do I want, the 60MM upper perch? __________________ 2016 MGM/Sakhir M4 DCT \| M-Adaptive \| Not Stock for Long
	Appreciate 0 Quote

09-09-2011, 03:25 AM	#15
akak1997 Major 70 Rep 1,159 Posts Drives: BMW 135 @ 135mph Join Date: Aug 2008 Location: Los Angeles iTrader: (2) Garage List 2008 135i [0.00]	Got mine last week! Great Product and super faster shipping! a side note, it does increase road noise a bit, doesn't bother me, just noticeable.
	Appreciate 0 Quote

03-01-2012, 06:34 PM	#17
HP Autosport Supreme Allied Commander 4038 Rep 55,516 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	Stock struts and spring...No problem! KW's...No problem! Koni's...No problem! AST's...No problem! Ohlins...No problem! Moton...No problem!
	Appreciate 0 Quote

03-10-2012, 12:05 AM	#18
HP Autosport Supreme Allied Commander 4038 Rep 55,516 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	Camber and caster plates Get your Vorshlag camber plates at HP Auotwerks, Inc. Your largest West coast stocking dealer and installer for Vorshlag suspension parts. We have been selling and installing these on E9x BMW's since 2006, no one on the West coast has a longer history with Vorshlag than we have.
	Appreciate 0 Quote

07-25-2012, 06:27 PM	#19
HP Autosport Supreme Allied Commander 4038 Rep 55,516 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	We now stock JRZ 1M RS, JRZ 1M RS1, JRZ M3 RS, JRZ M3 RS1 and all none M 135i/335i RS and RS1 Vorshlag camber plates! Attached Images
	Appreciate 0 Quote

07-30-2015, 10:30 PM	#20
HP Autosport Supreme Allied Commander 4038 Rep 55,516 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	These are slowly becoming available again. Wait time is down to about 2 weeks.
	Appreciate 0 Quote

09-06-2015, 11:19 PM	#21
HP Autosport Supreme Allied Commander 4038 Rep 55,516 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	The lead time is only 1-2 days on these excellent plates!
	Appreciate 0 Quote

12-22-2015, 01:23 PM	#22
HP Autosport Supreme Allied Commander 4038 Rep 55,516 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search