|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
07-19-2016, 12:48 PM | #1 |
Lieutenant
108
Rep 471
Posts |
08 135i, base hifi stereo - where do the mic leads for the upper center console go?
I'm hooking up the mic for my cic / combox retrofit.
My car did not have anything but the base hifi stereo originally. I checked every pin between the pins at the mic connector and TCU connector for connectivity and nothing. Does anyone know where the mic leads terminate?
__________________
08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
|
07-19-2016, 09:23 PM | #2 |
New Member
3
Rep 12
Posts |
Yup! I've done the retrofit, joining my microphone to the MULF. I followed this guide when it came to the wiring. Go to step 3 and look at the instructions regarding connector X14087. It's exactly the same in the 1er. When I was doing the install in my car, it appeared that the pins coming from the microphone connected to nothing, so I followed the guide to move them in order to connect up to the trunk. Additionally, like the guide, I switched pins in the trunk from the TCU connector to the MULF, since I was adding the $644 option.
|
Appreciate
1
str8shot107.50 |
Post Reply |
Bookmarks |
|
|