|
|
|
02-14-2013, 09:54 PM | #1 |
Lieutenant
72
Rep 524
Posts |
UUC SSK and DSSR problems.....
so started today excited ready to install my SSK and DSSR. Let me just say the day did not end up on a good note.
First off the DSSR fit into the tranny and the shifter rod with no problem (bolt sticking foreword). I then bolted in the carrier and hopped into the car to check it. First off the shifter is off to the side as seen in the pic. This is "centered" in neutral right now and if i click in the knob all the way, the knob is tilted counter-clock wise towards the passenger side. It looks as though this kit was made for a right hand drive car lol Now another problem is the car would not go into first or reverse. (sorry no pics) After further inspection, i realized that the DSSR was hitting the carrier not allowing me to get into gear. Tried flipping the DSSR around every which way upside down and flipping it around with no luck. Double checked the carrier and everything was installed correctly. Also checked to see if the shifter was installed wrong, even though UUC's instructions said to install with the bolt foreword with no luck. I now have the stock selector rod installed with the shifter and the bolt foreword. Anyone else experience anything like this?? btw i bought this used and the buyer said it fit in his 2008 135i and says he doesnt know why it wouldnt
__________________
2010 AW/BLK 135i VM 6465 Single Turbo, JB4 + MHD, VRSF CP & Tial, Big Tom, Fuel-It PI + Stage 3 + Return + Ethanol Sensor, BMW PE, MFactory LSD, Spec 3+ & MFactory SMFW, RB External PCV
Best stock turbo 12.5 @ 19.46 spinning all the way down RIP 2008 AW/BL 135i |
02-15-2013, 02:08 AM | #4 |
European Editor
10539
Rep 22,992
Posts |
Yes, not the stick/lever but the saddle carrier is different on the N55. I think you need to use a N54 carrier to make a SSK for the N55 work. Thats what a few of the 1M tuners have done.
__________________
|
Appreciate
0
|
02-15-2013, 03:45 PM | #5 |
Lieutenant
72
Rep 524
Posts |
Mine is an n54 carrier becuase it says n54 on it lol this was out of an 08 135 so i don't see why it wouldn't work. Any changes mid year that anyone knows of for the carrier? What else could be throwing off the entire centering and make the dssr not fit and the shifter angled when installed both ways?
__________________
2010 AW/BLK 135i VM 6465 Single Turbo, JB4 + MHD, VRSF CP & Tial, Big Tom, Fuel-It PI + Stage 3 + Return + Ethanol Sensor, BMW PE, MFactory LSD, Spec 3+ & MFactory SMFW, RB External PCV
Best stock turbo 12.5 @ 19.46 spinning all the way down RIP 2008 AW/BL 135i |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|