my n55 dyno results

[Venom]

FBO + Race Gas Dyno GB =P
Any shops in the bay want to see some 1's? =D

[MGallop]

Originally Posted by Venom

FBO + Race Gas Dyno GB =P
Any shops in the bay want to see some 1's? =D

FBO + Race gas + abandoned air strip... hahah

[Venom]

Originally Posted by PADLOCK

FBO + Race gas + abandoned air strip... hahah

Shhh.... It's my birthday present

[dicker]

The torque numbers are really off, most likely from using the wrong gear.

I put down 342/396 with just JB4 and an AR downpipe using Map 7 on EAS's dynojet.

[Top Gon]

Originally Posted by PADLOCK

FBO + Race gas + abandoned air strip... hahah

ahhh. counting down the days. e85 ftw

[MGallop]

Originally Posted by dicker

The torque numbers are really off, most likely from using the wrong gear.

I put down 342/396 with just JB4 and an AR downpipe using Map 7 on EAS's dynojet.

Thanks for the insight, your numbers look great! ... sucks knowing i wasted $130 on that dyno run, but maybe i can now skip air/fuel readings and knock the price down a little and do another run once i install my e85 wires.

[Everfly]

Originally Posted by PADLOCK

Thanks for the insight, your numbers look great! ... sucks knowing i wasted $130 on that dyno run, but maybe i can now skip air/fuel readings and knock the price down a little and do another run once i install my e85 wires.

$130 for how many pulls?
Anyhow last time I dynoed my car on 3rd gear too ;( and only put down 299rwhp 352tq on super flow dyno with JB4, AR DP, BMS intake and on map 5 with 3 gallons of E98 and the rest 93. Now I have flex fuel connector and haven't back to dyno yet but last time I ran 50/50 mixed of E98 mixed & 93 I saw peak at 22psi and hold at 19psi with my P3 gauge, car pull so much stronger. Wonder what it put down now with map 7. Let meet up sometime Matt. I just created the thread about San Jose meet, let me know
Vu

[MGallop]

Originally Posted by Everfly

$130 for how many pulls?
Anyhow last time I dynoed my car on 3rd gear too ;( and only put down 299rwhp 352tq on super flow dyno with JB4, AR DP, BMS intake and on map 5 with 3 gallons of E98 and the rest 93. Now I have flex fuel connector and haven't back to dyno yet but last time I ran 50/50 mixed of E98 mixed & 93 I saw peak at 22psi and hold at 19psi with my P3 gauge, car pull so much stronger. Wonder what it put down now with map 7. Let meet up sometime Matt. I just created the thread about San Jose meet, let me know
Vu

He would let me do probably 6-8 pulls but i stopped at 5 pulls. He said he didn't mind if i wanted to do more cuz the hard part is just getting the car set up. He was pretty cool about that.

I just received my flex wires as well. So hopefully should have that put in this weekend.

Hopefully we can get back on that dyno sooner than later. These low #'s are stuck in my head and killing me!!!

[Adam135]

wtf is wrong with the torque curve?

[MGallop]

Originally Posted by Everfly

Matt. I just created the thread about San Jose meet, let me know
Vu

I would like to personally thank Vu for a solid helpful hand
He got my flex fuel wires set up as well as helping me with running that damn usb cable through the firewall.

Not to many cool people like this guy around!!

Reason why my numbers were also so off for the dyno were because i was running map7 on old firmware.

So now that its all dialed in now with map5 and more e85, the car is ready for rd.2 on the dyno!

Thanks again Vu, your one hell of a guy!!

[Everfly]

Originally Posted by PADLOCK

I would like to personally thank Vu for a solid helpful hand
He got my flex fuel wires set up as well as helping me with running that damn usb cable through the firewall.

Not to many cool people like this guy around!!

Reason why my numbers were also so off for the dyno were because i was running map7 on old firmware.

So now that its all dialed in now with map5 and more e85, the car is ready for rd.2 on the dyno!

Thanks again Vu, your one hell of a guy!!

No problem Matt