bms dci oil free?

Trptguy · 11-14-2012, 08:52 AM

Hi guys and gals. I searched but could;t find an answer. Are the BMS DCI filters oil free or do they need to be oiled.

What is the best way to clean them, just water???

Thanks,

chachacha28 · 11-14-2012, 10:00 AM

they are oil free. to wash, i just rinse them with water and let them air dry for a few minutes.

Colt · 11-14-2012, 10:55 AM

yup oil free. How often are you supposed to clean them? Like every 20k miles or something?

DRedman45 · 11-14-2012, 11:17 AM

^when they are dirty....I generally clean my intake filter(on all my cars) every 10k or less pending how dirty it is

Trptguy · 11-14-2012, 11:45 AM

Thanks for the info. Mine is very dirty.....ugh

IronPickle · 11-14-2012, 05:04 PM

Are you guys sure about that? The red color when they're new is oil, isn't it? I used a K&N Filter Cleaning Kit and theyre a nice healthy shade of red again, whereas they used to be a filthy dull gunky grey. The process wasn't too bad either. Thoroughly rinse, apply cleaner, let sit for 10 min, rinse off, repeat if necessary, let sit overnight to dry, then g2g.

Heres a good informational link

Colt · 11-14-2012, 09:15 PM

Quote:

Originally Posted by Ammonia

Are you guys sure about that? The red color when they're new is oil, isn't it? I used a K&N Filter Cleaning Kit and theyre a nice healthy shade of red again, whereas they used to be a filthy dull gunky grey. The process wasn't too bad either. Thoroughly rinse, apply cleaner, let sit for 10 min, rinse off, repeat if necessary, let sit overnight to dry, then g2g.

hmmm, I'm pretty sure

. When I got mine they just came in a box, no plastic or anything over the intakes that I remember (which would indicate they are oiled to keep the oil from getting all over the box from shipping/storing).

Regardless, I'm getting two 7" new intakes when they become too ugly and dirty. Being 2" bigger than the BMS intakes I believe

http://www.amazon.com/gp/product/B00...ls_o00_s00_i00

froop · 11-14-2012, 09:23 PM

I have cp-e DCIs which are oiled and they came in plastic like Angerman said. They also feel oily, especially around the silicon coupler bit. I'm sure if they were dirty and needed re-oiling you probably wouldn't feel the oil as much though.

I was told by cp-e however that with their dry filters, you can choose to oil them if you want which will just make them an oiled filter. This may be the same with the BMS filters.

SteveAZ · 01-16-2013, 04:24 AM

I just stumbled across this.

You MUST oil these filters!

Don't believe me?

11-14-2012, 08:52 AM	#1
Trptguy Lieutenant 31 Rep 492 Posts Drives: '87 BMW 325ic, '08 BMW 135i Join Date: Jul 2011 Location: Littleton, MA iTrader: (0)	bms dci oil free? Hi guys and gals. I searched but could;t find an answer. Are the BMS DCI filters oil free or do they need to be oiled. What is the best way to clean them, just water??? Thanks,
	Appreciate 0 Tweet Quote

11-14-2012, 10:00 AM	#2
chachacha28 NCOIC of Kickin It 89 Rep 946 Posts Drives: 08 135i "Simona" Join Date: Feb 2011 Location: Great Falls MT iTrader: (1)	they are oil free. to wash, i just rinse them with water and let them air dry for a few minutes.
	Appreciate 0 Quote

11-14-2012, 11:17 AM	#4
DRedman45 Lieutenant 35 Rep 441 Posts Drives: E86 //M coupe Join Date: Oct 2012 Location: Northern va iTrader: (0)	^when they are dirty....I generally clean my intake filter(on all my cars) every 10k or less pending how dirty it is
	Appreciate 0 Quote

11-14-2012, 11:45 AM	#5
Trptguy Lieutenant 31 Rep 492 Posts Drives: '87 BMW 325ic, '08 BMW 135i Join Date: Jul 2011 Location: Littleton, MA iTrader: (0)	Thanks for the info. Mine is very dirty.....ugh
	Appreciate 0 Quote

11-14-2012, 05:04 PM	#6
IronPickle Captain 46 Rep 748 Posts Drives: Widebody m240i Join Date: Mar 2012 Location: Wilmington NC iTrader: (4)	Are you guys sure about that? The red color when they're new is oil, isn't it? I used a K&N Filter Cleaning Kit and theyre a nice healthy shade of red again, whereas they used to be a filthy dull gunky grey. The process wasn't too bad either. Thoroughly rinse, apply cleaner, let sit for 10 min, rinse off, repeat if necessary, let sit overnight to dry, then g2g. Heres a good informational link Last edited by IronPickle; 11-14-2012 at 05:09 PM..
	Appreciate 0 Quote

11-14-2012, 09:23 PM	#8
froop Colonel 188 Rep 2,682 Posts Drives: 08 AW 6MT E82 Join Date: Jul 2012 Location: Sydney, Australia iTrader: (3)	I have cp-e DCIs which are oiled and they came in plastic like Angerman said. They also feel oily, especially around the silicon coupler bit. I'm sure if they were dirty and needed re-oiling you probably wouldn't feel the oil as much though. I was told by cp-e however that with their dry filters, you can choose to oil them if you want which will just make them an oiled filter. This may be the same with the BMS filters. __________________ froop's AW 135i Build Thread
	Appreciate 0 Quote

01-16-2013, 04:24 AM	#9
SteveAZ Captain 66 Rep 654 Posts Drives: 135i Cab Join Date: Jul 2012 Location: Phoenix, AZ iTrader: (5)	I just stumbled across this. You MUST oil these filters! Don't believe me? __________________ 2008 E88--Fuel-It! Stage 4 LPFP & PI--PS2 turbos--JB4/MHD--FBO--662whp/604wtq 2011 E90--Fuel-It! S2BL LPFP and PI--PS2 Turbo--JB4/MHD--FBO--546whp/589wtq 2013 Mini JCW--Tune--DP--FMIC--a couple Fuel-It! goodies--265whp/320wtq 2013 F10--JB4/BM3 2015 F82--Fuel-It! Stage 3 LPFP & PI--PS2 Turbos-- JB4/BM3-FBO
	Appreciate 0 Quote