07-16-2013, 06:29 PM | #1 |
Sheriff
109
Rep 1,481
Posts |
Rubbing with spacers in the back
Just installed 10mm spacers all around with stock height settings. Noticed a rubbing in the rear tires. I'm using Michelin Sports 275/35/19 stock wheels.
Anyone experienced rubbing with spacers? Did you cut or trim anything to stop the rubbing? Is not a bad rubbing, i'm thinking its coming from the edge of rear bumper. Any ideas? Also on front there's a slight rubbing when turning but I think that's been covered here already and it's a known problem for many.
__________________
2023 Porsche Spyder, 2024 Porsche Macan GTS, 4Xe Rubicon & 2021 BMW X5 M Package
|
07-16-2013, 06:33 PM | #2 |
Private First Class
8
Rep 139
Posts |
I believe Michelins run wide. I'm using a stock setup with 10mm and opted to get the fenders rolled. Fine after the roll even with 4 passengers.
|
Appreciate
0
|
07-16-2013, 07:48 PM | #3 |
Sheriff
109
Rep 1,481
Posts |
Did you rub before with stock setup? can't see how would be rubbing from the fender itself. I believe it's more toward the end of fender liner where it meets the bumper, there's like a curve on the liner and bumper ends. Anyone else had same problem?
__________________
2023 Porsche Spyder, 2024 Porsche Macan GTS, 4Xe Rubicon & 2021 BMW X5 M Package
|
Appreciate
0
|
07-16-2013, 08:03 PM | #4 |
First Lieutenant
100
Rep 341
Posts |
running with 15mm rear with stock everything and no rubbing here. Even with 4 passengers and my hockey gear. Thinking about putting 12's in the front but being hesitant due to so many stories of rubbing.
|
Appreciate
0
|
07-17-2013, 02:39 AM | #5 |
Major General
377
Rep 5,730
Posts
Drives: BMW i3 rex
Join Date: May 2006
Location: SoCal
iTrader: (44)
Garage List 2018 I01 i3s | CURRENT [0.00]
2018 G01 X3 | CURRENT [0.00] 2017 I01 i3 | SOLD [0.00] 2017 F48 X1 | SOLD ... [0.00] 2016 I01 i3 | SOLD [0.00] 2017 F22 M240 | SOLD [8.00] 2016 F25 X3 diesel ... [0.00] 2006 E60 550 | SOLD [6.00] 2011 E90 335 | SOLD [8.66] 2012 E82 135 | SOLD [5.50] 2011 E82 1M | SOLD [7.94] 2007 E85 Z4M| SOLD [4.50] 2003 E53 X5 4.6is S ... [9.00] 2008 E92 328 | SOLD [0.00] 2008 E82 135 | SOLD [0.00] 2008 E90 335 | SOLD [0.00] 2003 E46 M3 | SOLD [7.50] 2006 E90 330 | SOLD [10.00] 2003 E46 330ZHP | SOLD [0.00] |
running 18mm in rear with my OEMs and NT05s and an eibach drop and no running neither
|
Appreciate
0
|
07-17-2013, 04:57 PM | #6 | |
Captain
50
Rep 779
Posts
Drives: 1 Series M Coupe 697/740
Join Date: Apr 2011
Location: Los Angeles / San Diego, California
|
Quote:
__________________
2011 BMW BSM E82 ///1M
L1MTD |
|
Appreciate
0
|
07-17-2013, 06:34 PM | #7 |
SCCA B Street
117
Rep 660
Posts |
A 295 hoosier will fit in the rear no rubbing
A 275/30 will fit in the front with a 5mm spacer
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|