|
|
|
09-18-2013, 10:47 AM | #1 |
Слава Украине!
2483
Rep 2,490
Posts |
1ST World Problem
I got a ridiculously good deal on a BNIB BMW CF strut brace (51710429377) and just couldn't pass it up. Arrives tomorrow.
Thing is, I really planed to install the M3 bits and even ordered the Heater Closing Panel and Grommets to do it cleanly. I realize on our rigid, modern vehicles a strut brace is of debatable benefit, but the CF one looks so damn sexy. So, do I: 1) Sell the CF strut brace immediately (hopefully for a profit...) 2) Install the brace until I get around to ordering the M3 bits, and then sell the CF brace (hopefully for a profit...) 3) To hell with it, just run with the CF brace
__________________
|
09-18-2013, 11:48 AM | #2 |
Banned
471
Rep 928
Posts |
Depends on what you do with the vehicle. If you track it, it will give some support and rigidity you'd want while cornering. If you are like me and only open the hood for maintenance purposes, its kind of silly to spend money on something that is virtually invisible and not so beneficial for a daily commute.
Just my .02 |
Appreciate
0
|
09-18-2013, 05:53 PM | #5 |
Resident Tamed Racing Driver
300
Rep 4,697
Posts |
Sell it.
Mason engineering bar is a much better choice anyway. It has the option to reroute the firewall braces to allow strut rebound adjustment.
__________________
2005 E46 M3 Interlagos/Cinnamon with Sunroof Delete
|
Appreciate
0
|
09-18-2013, 06:32 PM | #6 |
Слава Украине!
2483
Rep 2,490
Posts |
I've been eyeing the Mason for a while but have two concerns. One, the mounting holes do not appear to be slotted and I have no plans beyond Dinan for camber plates. Does Mason just use big damn holes to compensate for chassis manufacturing tolerances and camber adjustments? Two, it may be just the photos, but I'm not overly impressed with the welds (or maybe I'm just spoiled. I work with some great TIG welders).
__________________
|
Appreciate
0
|
09-18-2013, 06:56 PM | #7 |
Слава Украине!
2483
Rep 2,490
Posts |
Make it three. No mention is made of any kind of corrosion protection on the aluminum rig. Type II min. (Yes, this could be answered with a phone call)
__________________
Last edited by Suprgnat; 09-18-2013 at 06:56 PM.. Reason: it's spelled "three", not "thee". |
Appreciate
0
|
09-18-2013, 07:21 PM | #8 |
Resident Tamed Racing Driver
300
Rep 4,697
Posts |
Shrug, they have a long history of functional high quality bars. I don't care about weld tidiness all that much. I also think the aluminum bar is anodized? Either way, I have a top notch powdercoater in my area.
__________________
2005 E46 M3 Interlagos/Cinnamon with Sunroof Delete
|
Appreciate
0
|
09-18-2013, 07:59 PM | #9 | |
Слава Украине!
2483
Rep 2,490
Posts |
Quote:
Call me weird, but it matters to me. A sound, proper weld actually looks good. Not too much filler, not too little, not too much heat, not too little, not too much penetration..... A good weld is art. It might be a minor obsession of mine. Those look like OK welds. I tell the guys in the machine shop/manufacturing that I don't expect or want the assemblers to have to perform any secondary operations. They shouldn't have to.
__________________
|
|
Appreciate
0
|
09-18-2013, 08:12 PM | #10 |
Major
145
Rep 1,448
Posts
Drives: M2
Join Date: Oct 2008
Location: Melb, Vic, Aus
|
share the love and sell it for what you got it for.
|
Appreciate
0
|
09-18-2013, 08:14 PM | #11 |
Слава Украине!
2483
Rep 2,490
Posts |
Make me an offer!
__________________
|
Appreciate
0
|
09-18-2013, 08:19 PM | #12 |
Major
145
Rep 1,448
Posts
Drives: M2
Join Date: Oct 2008
Location: Melb, Vic, Aus
|
|
Appreciate
0
|
09-18-2013, 08:20 PM | #13 |
Слава Украине!
2483
Rep 2,490
Posts |
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|