|
|
|
04-26-2012, 06:32 AM | #1 |
First Lieutenant
25
Rep 302
Posts |
Plastic lower door sill refit
Not referring to the kick plate, but the plastic trim above the sill. Tried to remove this to access an adjacent panel. Now the thing one click back into place and keeps poping up at the front two clips.
Isn't just a case of pushing back on? |
01-26-2014, 05:58 PM | #3 |
The Crowing
112
Rep 2,005
Posts |
Post some pics. Not sure exactly what your referring to.
__________________
2009 135i : BMS JB4 G5 ISO,CXRacing FMIC Kit,Injen Cold Air Intake,Evolution Raceworks Charge Pipe,Walboro Inline Fuel Pump, E85 BMS Backend Flash w/ 60% E85,BMS Meth injection (trunkmount),BMS dual meth nozzles,Spec stage 2+ clutch w/ steel SWFW,BMS Catless Downpipes,Berk Tech Race Axleback |
Appreciate
0
|
01-27-2014, 12:45 AM | #4 |
Second Lieutenant
36
Rep 239
Posts |
ended up watching a video, can't seem to find the link now.
Basically you remove the tan colored clips from the car, and install them onto the black cover. After transferring the clips you just snap the piece back in. |
Appreciate
0
|
01-28-2014, 01:00 AM | #5 | |
The Crowing
112
Rep 2,005
Posts |
Quote:
__________________
2009 135i : BMS JB4 G5 ISO,CXRacing FMIC Kit,Injen Cold Air Intake,Evolution Raceworks Charge Pipe,Walboro Inline Fuel Pump, E85 BMS Backend Flash w/ 60% E85,BMS Meth injection (trunkmount),BMS dual meth nozzles,Spec stage 2+ clutch w/ steel SWFW,BMS Catless Downpipes,Berk Tech Race Axleback |
|
Appreciate
0
|
01-28-2014, 09:15 PM | #7 |
The Crowing
112
Rep 2,005
Posts |
Awesome. Thanks.
__________________
2009 135i : BMS JB4 G5 ISO,CXRacing FMIC Kit,Injen Cold Air Intake,Evolution Raceworks Charge Pipe,Walboro Inline Fuel Pump, E85 BMS Backend Flash w/ 60% E85,BMS Meth injection (trunkmount),BMS dual meth nozzles,Spec stage 2+ clutch w/ steel SWFW,BMS Catless Downpipes,Berk Tech Race Axleback |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|