|
|
|
|
| 01-03-2018, 07:45 PM | #1 |
|
Banned
185
Rep 615
Posts |
AFR Guage Install Question
looking to add a physical afr guage but im puzzled on how to wire it to both of the sensors. I could wire it to only 1 o2 but i wouldnt feel 100% confident in the reading on the other bank. Any afr wires runninf out from the dme that i can splice into? also looking at the same for a iat and egt guage.
|
| 01-06-2018, 05:48 AM | #2 |
|
C2H5OH
4482
Rep 2,183
Posts |
I have heard that tapping into a factory wideband compromised the signal to the ECU. Signal is no longer reliable. No idea if true, butt based on inherent voltage losses I wouldn't risk it. Same for IAT.
Car has no EGT sensor stock. Honestly your best option is to use the JB mobile app and a phone. It's things you already have. I'd imagine the gauges would either end up in a location that isn't direct sight or if they are they obscure the forward/side vision. Another option is something like the Awron gauge or Ultra Gauge. |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|