|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
12-10-2018, 06:20 PM | #1 |
Major
82
Rep 1,051
Posts |
Eibach Multi-pro R2 coilovers, Vorshlag camber plates, M3 control arms
1. Eibach Multi-pro R2 coilover kit, dual damper adjustment and external reservoirs. Highest end kit Eibach makes. Info: https://eibach.com/us/c-95-products-...djustable.html (note kit is no longer listed for E8x/E9x, but Eibach can still rebuild dampers if ever required as they're mostly modular). Used, <15k, good condition, a few scuffs and such. Would prefer to sell with camber plates below, but will sell $1000 parted out. Will require a mounting solution for reservoirs, though clasps included. And you need a perch solution for the front springs to your top perches. There are a few options on the market, needs to fit 2.5" coilover kit springs for front only, rear includes height adjustable spring stands. Will include pictured spanner. 2. Vorschlag 135i camber plates. Compatible with above with proper upper sprint perches, only requires a top nut which Vorshlag can manufacture for you. New, never used. New price is ~$440. No asking price on this until I sell the coilovers. Note nuts are 1.5 pitch, Eibach kit is 1.75 pitch, but can be used as reference. $1200 for both above items (coilovers and camber plates). Will not sell camber plates separately unless the coilovers sell first. All of this should be compatible with E8x and E9x, but your responsibility to check compatibility. Again, you will need a top nut to fit the camber plates and damper pins to complete, Vorshlag can make these for you for a reasonable price. I have some with the right shape but wrong thread pitch as a guide. 3. **SOLD** TRW "M3" front lower control arms. These are the "not BMW" ones where the BMW logo has been removed after manufacture. New, unused. Normally ~$340 new. Again, believe these fit any E8x or E9x. Inclues the headlight leveling arm to account for geometry change for standard E8x/E9x cars that are converting. Kit requires immediate alignment as there is a change to suspension geometry, not just tighter bushings. **SOLD**
__________________
2009 BMW 135i 6MT Sport, AFE intake, Cobb AP, Apex 18x8.5+9.5, 255/275 PSS
Last edited by Freon; 01-01-2019 at 04:04 PM.. Reason: price reduction |
12-11-2018, 04:11 PM | #3 |
Lieutenant
352
Rep 575
Posts |
Can you get a shipping quote on the control arms to 90032?
__________________
2011 Space Grey 135i DCT:
Pure Stage 2, Fuel-it Stage 2 LPFP, ST XTA Coilovers, Berk Street Axle Back, MHD Stage 2+, VRSF Catless DP, VRSF 5" FMIC, VRSF LCP, BMS UCP, M3 FSB, e92 M3 Drivers Seat. |
Appreciate
0
|
12-19-2018, 08:19 AM | #5 |
Major
82
Rep 1,051
Posts |
bump, coilovers and camber plates still available. Priced reduced.
__________________
2009 BMW 135i 6MT Sport, AFE intake, Cobb AP, Apex 18x8.5+9.5, 255/275 PSS
Last edited by Freon; 12-19-2018 at 02:50 PM.. |
Appreciate
0
|
01-02-2019, 09:21 PM | #7 |
Major
82
Rep 1,051
Posts |
Tentatively sold to local buyer, will repost later if for some reason that falls through.
__________________
2009 BMW 135i 6MT Sport, AFE intake, Cobb AP, Apex 18x8.5+9.5, 255/275 PSS
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|