I am wanting to ditch side-of-console cup holder retrofit...

ajacks8 · 01-15-2020, 01:51 PM

I have only had my MT 2010 135i for a few weeks, but knock this with my knuckles EVERYTIME I hit 5th gear. Hoping that there HAS to be a better option, were these in-dash cup holders ONLY available on the e9x? They seem like a perfect option?

https://c1552172.ssl.cf0.rackcdn.com/76804_x800.jpg

Does anyone have them retrofitted or know if it can/cannot be done???

Thanks!

Philly_sweden · 01-20-2020, 01:30 PM

Quote:

Originally Posted by ajacks8

I have only had my MT 2010 135i for a few weeks, but knock this with my knuckles EVERYTIME I hit 5th gear. Hoping that there HAS to be a better option, were these in-dash cup holders ONLY available on the e9x? They seem like a perfect option?

https://c1552172.ssl.cf0.rackcdn.com/76804_x800.jpg

Does anyone have them retrofitted or know if it can/cannot be done???

Thanks!

Just remove it? It's just snapped in

MightyMouseTech · 01-20-2020, 02:03 PM

How is your hand hitting it, it is miles away from the shifter? Are you sure it's not just put in backwards? It just pops out of its holder.

ajacks8 · 01-20-2020, 06:16 PM

I think what I hit is anything that I put into it. I think it can be removed without issue....I’m more looking for a GOOD alternative to it. The link I provided in original post has Perhaps more potential than anything else that I’ve seen, but carving into glovebox area to test fit scares me a little bit. Surely someone has tried something for a good, realistic cup holder? Thanks for any feedback!

Suprgnat · 01-20-2020, 06:30 PM

Quote:

Originally Posted by ajacks8

I think what I hit is anything that I put into it. I think it can be removed without issue....I’m more looking for a GOOD alternative to it. The link I provided in original post has Perhaps more potential than anything else that I’ve seen, but carving into glovebox area to test fit scares me a little bit. Surely someone has tried something for a good, realistic cup holder? Thanks for any feedback!

Suprgnat · 01-20-2020, 06:39 PM

Or for the truly ambitious, a quest for NLA parts.

tracer bullet · 01-20-2020, 06:57 PM

Quote:

Originally Posted by MightyMouseTech

How is your hand hitting it, it is miles away from the shifter? Are you sure it's not just put in backwards? It just pops out of its holder.

Agreed, and quoting this to be sure to say to check it out. Even with something in it, it's a reach. It might just not be correctly installed.

dtla1 · 01-21-2020, 11:05 AM

Quote:

Originally Posted by Suprgnat

Or for the truly ambitious, a quest for NLA parts.

This is what OP is looking for, no doubt, never seen it before myself. I would imagine decently rare.

b1aze · 01-27-2020, 10:43 AM

So after installing my own cup holder retrofit, I can see how, if you have meaty hands or grip the knob differently you COULD contact the cup holder.

I still think the BMW Performance SSK lever would be a solution to this problem

twinturbovan · 01-27-2020, 03:45 PM

Hmm I love my side mounted cup holder. It's perfectly located for my S10+ with my USB Charger and AUX Cord.

01-15-2020, 01:51 PM	#1
ajacks8 New Member 39 Rep 23 Posts Drives: 2004 X5 estoril 4.8is Join Date: Jul 2017 Location: Omaha, NE iTrader: (0)	I am wanting to ditch side-of-console cup holder retrofit... I have only had my MT 2010 135i for a few weeks, but knock this with my knuckles EVERYTIME I hit 5th gear. Hoping that there HAS to be a better option, were these in-dash cup holders ONLY available on the e9x? They seem like a perfect option? https://c1552172.ssl.cf0.rackcdn.com/76804_x800.jpg Does anyone have them retrofitted or know if it can/cannot be done??? Thanks!
	Appreciate 0 Tweet Quote

01-20-2020, 02:03 PM	#3
MightyMouseTech Major General 4393 Rep 6,202 Posts Drives: 13 135i 6MT LeMans Blue MSport Join Date: Feb 2013 Location: Ottawa, Canada iTrader: (0)	How is your hand hitting it, it is miles away from the shifter? Are you sure it's not just put in backwards? It just pops out of its holder.
	Appreciate 1 b1aze587.50 Quote

01-20-2020, 06:16 PM	#4
ajacks8 New Member 39 Rep 23 Posts Drives: 2004 X5 estoril 4.8is Join Date: Jul 2017 Location: Omaha, NE iTrader: (0)	I think what I hit is anything that I put into it. I think it can be removed without issue....I’m more looking for a GOOD alternative to it. The link I provided in original post has Perhaps more potential than anything else that I’ve seen, but carving into glovebox area to test fit scares me a little bit. Surely someone has tried something for a good, realistic cup holder? Thanks for any feedback!
	Appreciate 0 Quote

01-20-2020, 06:39 PM	#6
Suprgnat Слава Украине! 3377 Rep 2,716 Posts Drives: 2013 128i LMB 6MT ZMP Slicktop Join Date: Jan 2013 Location: California iTrader: (8) Garage List 2013 128i [9.56]	Or for the truly ambitious, a quest for NLA parts. __________________ Inertia is the enemy! My car's photo history: https://www.1addicts.com/forums/show....php?t=1570551
	Appreciate 0 Quote

01-27-2020, 10:43 AM	#9
b1aze Just one more taste... 588 Rep 2,011 Posts Drives: 2013 128i 6MT MSport Join Date: Aug 2012 Location: Uxbridge MA iTrader: (18)	So after installing my own cup holder retrofit, I can see how, if you have meaty hands or grip the knob differently you COULD contact the cup holder. I still think the BMW Performance SSK lever would be a solution to this problem
	Appreciate 0 Quote

01-27-2020, 03:45 PM	#10
twinturbovan Second Lieutenant 220 Rep 223 Posts Drives: 2009 BMW 135i M Sport Vert Join Date: Jun 2019 Location: San Antonio, TX iTrader: (0)	Hmm I love my side mounted cup holder. It's perfectly located for my S10+ with my USB Charger and AUX Cord.
	Appreciate 0 Quote