Light out error after LED headlight install

[Powerbarjunkie]

I just finished installing Can-bus approved LED lights in my 2012 128i. I was told I shouldn't have an issue but I still do. I was told to order resister / decoder off Amazon but wondering if there is an easier way to fix the error code.
Thanks

[chalupa2000]

You'll need to code out the bulb checks for the lights you installed. Search in the e90 coding forum since there different ways and programs to achieve this.

[///Makis]

Originally Posted by Powerbarjunkie

I just finished installing Can-bus approved LED lights in my 2012 128i. I was told I shouldn't have an issue but I still do. I was told to order resister / decoder off Amazon but wondering if there is an easier way to fix the error code.
Thanks

Did you ever get this fixed?

I had approved LEDs as well but kept getting errors and couldn't stand the noise from the car at every other light or when I turned the car on. The guy I ordered them from sent me new ones. No dice. I used Carly and turned the check off. Still getting error. I assume I need the hardware as well but did not want to deal with it anymore.

Did you get it fixed?

[tracer bullet]

Strange, both things should work. I have LED bulbs in my tails, with no errors. Also have and use Carly and the things I ask of it, it does.

[Edrift]

Never used Carly but used the BMW tools to code led bulbs. From memory there is a cold check on start and intermittent warm checks when driving. You need to code both off.