|
|
|
10-06-2012, 05:47 PM | #1 |
Second Lieutenant
54
Rep 230
Posts |
Rear OE wheels fit if mounted in front?
Will our rear OE (264) wheels and tires fit without rubbing if mounted up front (with camber plates)? Thanks!
|
10-06-2012, 05:49 PM | #2 |
Major
66
Rep 1,266
Posts
Drives: AW 135i
Join Date: Aug 2012
Location: Waterford, Mi
|
With camber plates yes.
|
Appreciate
0
|
10-06-2012, 07:55 PM | #4 |
Major
66
Rep 1,266
Posts
Drives: AW 135i
Join Date: Aug 2012
Location: Waterford, Mi
|
I had 245s on with no camber adjustments, and i barely rubbed, those were 40 series. Assuming you're at stock suspension height, the tires should clear the fenders. You'll have a slight rub on full lock turns on the front fender liner. But its so slight that you'd never hear it rubbing. I only noticed because there was a small clean spot.
|
Appreciate
0
|
10-06-2012, 10:12 PM | #5 |
Second Lieutenant
54
Rep 230
Posts |
You said it's a slight rub. Is that under full load at speed or just street driving? I'm hoping to use the wheels at the track where the suspension compresses a lot more than street driving.
|
Appreciate
0
|
10-06-2012, 11:36 PM | #6 |
Major
66
Rep 1,266
Posts
Drives: AW 135i
Join Date: Aug 2012
Location: Waterford, Mi
|
slight rub is only over harsh bumps, i experienced nothing under full load.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|