|
|
|
05-19-2013, 07:11 PM | #1 |
Private
4
Rep 80
Posts |
Vgate bluetooth adapter triggering SES dash light
I installed the Vgate bluetooth adapter and it immediately triggered my service engine soon light. So I ran the diagnostic scan through the Torque app and it is giving me multiple misfire codes, multiple cylinders. Then after a few rides the light went off. Car is running fine, I can tell you I am def not getting misfires car idles fine and runs strong just as it has always has. So what is going on is the vgate faulty? Also when I try to clear the codes it does not turn off the SES light. The torque app works fine however as far as the engine monitoring. I am hoping the light goes off soon sgain and I will not use the vgate for a few days to see if the light stays off. But the light has never gone on while I've owned the car and again the car is running fine.
|
Post Reply |
Bookmarks |
|
|