|
|
|
11-14-2014, 09:41 AM | #1 |
Major
195
Rep 1,181
Posts |
TUN3D 135i build (1M Conversion) - Front
Thanks to ilikebmxbikes, Sk8fe, Venom, EINSER M, Mybad135, Tony135, uberschnell, and a few others for answering my questions in regards to this project. Not reinventing the wheel here, just another boring 1M conversion -- haha! Hopefully some of the pics will help the next guy in line -- so lets get to it.
Note: I broke this build into different sections/threads. The page was getting so big that even I had trouble following or finding things at times. This conversion has many phases. I've done my best to group them in a manner which is easy to understand and navigate. Navigation: Conversion & Parts List • Home Page & Main Build Thread • Front < • Rear & Quarters • Battery & Exhaust • Ducts & PPK2 ---------------------------------------- In this post you'll find: • Water Tank Removal • 1M Side Marker Mod • 1M Front Fender Installation • Headlight Bracket Adjustment/Differences • Headlight Washer & Nozzle System Options • Headlight Washer Removal Mod • 1M vs. 135i Wheel Cover & Underhood Shield Comparison • 1M Horn Relocation ---------------------------------------- ////////////////////////////////////////////// Front Parts List ========================= Thanks again to ilikebmxbikes & Sk8fe for compiling/gathering the part numbers: Required: 51118057717 - Front Bumper (ordered w/out light-washer holes) 51117900764 - Front Bumper Grill 41358052625 - Fender L 41358052626 - Fender R 51138051817 - Fender Side Marker Mount/Bracket L 51138051818 - Fender Side Marker Mount/Bracket R 61678051590 - Windshield Reservoir Tank 51748051605 - Air Duct L 51748051606 - Air Duct R 51648051987 - Headlight Bracket L 51648051988 - Headlight Bracket R 51718051591 - Front Fender Liner L 51718051592 - Front Fender Liner R 51718051595 - Cover, Wheel Housing Front L 51718051596 - Cover, Wheel Housing Front R 51758051609 - Underhood Shield May not be needed: 51118051613 - Front Bumper Tow Hook Cover (*1) 51718045553 - Front Fender Liner Cover L (*2) 51718045554 - Front Fender Liner Cover R (*2) 51778052517 - Supporting Ledge L (*3) 51778052518 - Supporting Ledge R (*3) Optional Parts: 51748051604 - Air Duct, Bottom (*4) 51138051601 - Chrome Side Marker L (*5) 51138051602 - Chrome Side Marker R (*5) ======================= Notes & Updates: (*1) My front bumper came with this. Order the bumper first. (*2) Liners did not come with covers, however, after comparing them -- they are identical. You can reuse the old covers. (*3) Compared parts -- they are identical. You're current parts can be reused. (*4) Optional if you're running an aftermarket inter-cooler that required cutting. (*5) These part numbers are for OEM chrome side markers. They run about $30/each. Not a big fan of chrome, so I ordered ind-distribution markers in flat-black. ////////////////////////////////////////////// 08/03/14 - WATER TANK ========================= Note: Some of the extra wiring that you see with florescent-pink tie-wraps are not OEM. Prior to starting this project, I was using a 1M-Style replica bumper with fog-lights. What you see here is fog-light wiring harness. It will be removed... So naked... Easiest way I found to drain the tank fluid, was to disconnect the right light-washer hose... Draining! I took this time to clean the crap out of the inner fender... Comparing tanks -- just in case anyone wants to see the difference. You can see the 1M fender shape in the new tank... ////////////////////////////////////////////// 08/03/14 - SIDE MARKERS ========================= Here's a little something for you guys in regards to the side-markers. The 1M side-markers, WILL NOT work by simply connecting them. You have to invert the wires on the harness. Grab yourself a tiny flat-head screwdriver. You don't need the white connector I'm touching for the 1M markers. Take it off... 1) With a small screwdriver, find the harness cap lock-tab, gently apply pressure while simultaneously sliding it back. 2) Remove the white clip to expose the pins. 3) Apply pressure to the pink lock-tab and slide them out. Invert the wires, reverse the steps, connect, and test -- money$$! ////////////////////////////////////////////// 08/07/14 - FENDERS ========================= Time for new wheels... Tank connections and fender removal/install are really straight forward... Word to the wise, don't COMPLETELY bolt down your new fender without making sure that it lines up well (consistent gaps) and that you can close the hood properly... ////////////////////////////////////////////// 08/09/14 - LIGHT BRACKETS ========================= Note: In this section, I show you how to transfer your high-pressure nozzles onto 1M light-brackets. Please read the "HEADLIGHT-WASHERS" update above before transferring these -- no sense in working twice. Headlight brackets are identical, with the exception of the fender mounting points. 1M mounting points are much smaller, less pointy and different in shape... Here is the side-by-side view of the pieces we're transferring... Grab a Phillips screwdriver and apply lots of pressure to the center pin until it pops. Turn over the bracket and pull it out with some pliers... Once the pins are out, with your finger, gently work the expanding clips and make then as as possible. At this point, you should be able to simply pull out the entire washer assembly. If its not easily coming out, work the expanding clips a little more. The clips are pretty fragile, so DO NOT go to work on them with pliers -- you'll break them... With the washer assembly out, line up the clips onto the new bracket. Grab your pliers and gently push them thru. Insert the pin with your finger and you're done... ////////////////////////////////////////////// 08/09/14 - HEADLIGHT-WASHERS ========================= 135i headlight-washers become obsolete with a 1M bumper. 1M's removed the bulky high-pressure nozzle(s) and replace it with a much smaller spray nozzle(s). That said, and in most cases, high-pressure nozzles need to be removed... REMOVE the high-pressure nozzle system if: 1) You ordered the 1M bumper WITH nozzle openings AND you're buying the 1M nozzle system. 2) #1 is true AND you're doing a PPK2 AND you're relocating the horns to 1M location(s). 3) #1 is true you're relocating the horns to 1M location(s). Note: If you ordered the bumper with nozzle openings, I'm assuming that you're also buying the 1M nozzle system. In this case, there is just no need to keep those bulky high-pressure nozzles attached to the light-brackets... KEEP the high-pressure nozzle system if: 1) You ordered the 1M front bumper WITHOUT nozzle openings AND they are coded out/disabled. 2) #1 is true AND you're doing a PPK2 AND you're relocating the horns according to the PPK2 installation manual, non-1M location(s). 3) #1 is true AND you're not doing a PPK2 AND you're not relocating the horns. Note: If you ordered the bumper without nozzle openings, and don't want to get rid of the 135i's native high-pressure nozzle system, make sure they are coded out/disabled. You certainly don't want them popping up, banging against the inside of the bumper, and spraying washer-fluid inside the bumper. In this case, the only time where you'll need to get rid of them is if you relocate the horns to 1M location(s). To see horn positioning options, please see the "HORNS" update... ////////////////////////////////////////////// 08/10/14 - SHIELDS ========================= Here are the underhood shields side-by-side... ////////////////////////////////////////////// 08/10/14 - FRONT WHEEL COVERS ========================= Here are the front wheel covers side-by-side... ////////////////////////////////////////////// 08/27/14 - HORNS PART 1 (HEADLIGHT-WASHERS & TANK) ========================= Note: After a shit-ton of research, here's a little write up in regards to relocating your horns and removing the headlight washers. These two go hand-in-hand as you will see. If you're asking yourself why this needs to be done, checkout the "DUCTS & PPK2", "HEADLIGHT-WASHERS", & "LIGHT BRACKETS" updates... This is what you need to remove in order to relocate the horns: 1) Hose, headlight cleaning system 2) Housing, high-pressure nozzle(s) 3) Tie-wrap clips (on the back of the bumper carrier) 4) Horn electrical extension Note: To completely remove the system, you also need to remove the pump and it's connecting hose which runs underneath the right headlight. Removing the items above will allow you to mount the horns, however, you still need to cap the tank. Please see the solution below... If you're not running any of the headlight nozzle systems, the line needs to be capped -- either at the pump or light bracket... I disconnected/removed the pump & main line that feeds the light washers. Turned on the car and checked for codes/errors -- none! Tested the main washers -- perfect. Plugged the tank -- done! I also zip-tied the connection to keep it from banging around. For the plug, I used a 1/2" Poly Alloy Test Plug from http://www.apolloflow.com. Item #APXPAP1250PK. You can pick these up at Home Depot or Lowes... ////////////////////////////////////////////// 08/27/14 - HORNS PART 2 (RELOCATION) ========================= Lets start off by understanding the difference. 135i's have both horns (high/low pitch) located inside the left fender. 1M's moved their horns underneath each headlight to accommodate the PPK2's left radiator and air-duct... If you're doing the PPK2 and relocating the horns according to their instructions, here is where they go. Keep in mind that you will have to drill the bumper carrier... Note: If you buy the PPK2 parts individually (like I did), then you WILL NOT be able to buy the hardware for relocating the horns from BMW. The retrofit/relocation hardware comes with the kit. There are no individual part numbers for the brackets themselves. If you have better luck finding them, let me know... Here's a live view of where BMW wants you to put the horns... The bumper carrier already comes with the necessary holes to relocate the horns... Note: You'll have to remove the "tie-wrap clips(s)" that go inside these holes. They are used to mount the relocation brackets... I created this outline of what the 1M's horn bracket/mount looks like. Unfortunately, it's nowhere to be found. Both the dealer and all online catalogs only offer the 135i's dual bracket/mount. The solution -- we make or buy our own brackets... To remove the horns, take out these two nuts... The bracket consists of two bolts and two rivets. To access the top rivet, you will need to remove the headlight... Drill out the rivets and hammer out the stubs... If you're moving the horns to 1M location(s), this is why you can't keep the high-pressure nozzles... After removing the extension, this is what you're left with. It's the perfect length for the new horn position... I bought some "temporary" brackets and drilled two 5/16 holes on each leg. You can reuse the same washer & nut from the old bracket. For the bumper carrier, I bought 1/4" x 20 x 3/4 bolts, washers, and nuts... Here is the temporary solution I came up with -- mounted... A rare view of the back-side... Took me a while, but this is the bracket I ordered. I wanted something professionally done. The dimensions are 2.94" x 1.7" with 5/16 holes. Ordered it from www.hardwareworld.com. Item #9W78U6, UPC: 886780005844... Here are the new brackets. Finish looks awesome -- perfect clearance. Couldn't be happier... More pics of the final product... Last edited by TUN3D; 11-20-2015 at 09:36 AM.. |
11-14-2014, 04:35 PM | #3 |
European Editor
10757
Rep 22,992
Posts |
Thanks for this DIY thread!
__________________
|
Appreciate
0
|
11-14-2014, 05:29 PM | #4 |
Major
195
Rep 1,181
Posts |
Tony135 > If your horns are good, it's a easy change. Scrap the awkward dual bracket and relocate them with the L-shapes. The only issue will be your headlight washers. Forgot if you bumper has them or not.
|
Appreciate
0
|
11-15-2014, 01:14 PM | #5 |
Captain
65
Rep 762
Posts
Drives: E82 135i N54 6MT & F80 M3 DCT
Join Date: Jan 2011
Location: USA
|
Goodness. You are awesome! Thanks for the detailed step by step. Bookmarked and PDF'ed for future reference!
|
Appreciate
1
|
11-17-2014, 08:06 AM | #6 |
Major
195
Rep 1,181
Posts |
sparkyblue > Thanks! Much appreciated. I will be refining/reorganizing these threads. I had it all in a single page before (made sense for those purposes), I have to revise.
|
Appreciate
0
|
12-13-2014, 03:51 PM | #7 |
Shazaam
10
Rep 197
Posts |
Added the parts to my cart! Waiting to hear back from the shop on a quote before I pull the trigger!
__________________
@mattbmclean6f
2009 135i M Sport 6MT - ER CP - HKS BOV - AFE Intake - Cobb AP - VRSF DP's - Remus Quad Race Exhaust - CF Quad Diffuser - CF Spoiler - 19" Alufelgen CSL's - Hardwired V1 - Laser Interceptor Dual - Black Grilles - 1M Bumper - CF Splitter - Custom Alcantera Flat Bottom Steering Wheel |
Appreciate
0
|
01-04-2015, 01:28 AM | #8 |
asn993
131
Rep 260
Posts |
Hi TUN3D,
You showed how to swap the high pressure headlight washer from the 135 to 1M light bracket. Does this mean you can retain the 135 system if you order the 1M bumper with the washer holes or is it simpler to do the 1M system or delete altogether ? My other question is what 18" wheels ie width and et do you recommend on the standard 135 hubs without resorting to spacers or custom made wheels? Thanks from Australia |
Appreciate
0
|
01-04-2015, 11:36 AM | #9 |
Major
195
Rep 1,181
Posts |
asn993 > I showed how to swap the 135i pop-ups, in case anyone wants to keep them in the car. That's more for people who are doing the "front" conversion only (without the nozzle holes), and eventually want to go back to stock. It also serves as a guide on how to remove them.
The 135i pop-ups will not work with the 1M bumper. The 1M uses spray nozzles. It's a much simpler setup -- less bulky. 1M: http://www.partsbase.org/bmw/1-e82-1...lamp-cleaning/ 135i: http://www.partsbase.org/bmw/1-e82-1...lamp-cleaning/ The 1M system is better (in my opinion), that said...I don't like the headlight washers. They spit all over the car and ruin a good wash more times than not. Really comes down to the weather in your area -- up to your discretion in that regard. On the standard 135i, I ran VMR 710's: Front Size/Offset:18x8.5 ET45 && Rear Size/Offset:18x9.5 ET50 If you want NO rubbing, do 225 (Front) and 255 (Rear) -- It's a conservative but hassle FREE setup. If you roll your fenders, you can do 265's in the rear. I always did 225/265. |
Appreciate
0
|
01-05-2015, 10:03 PM | #11 |
asn993
131
Rep 260
Posts |
Thanks for the response I agree they are messy and not good for the environment with all that wasted water
In terms of the 18" setup apologies I was referring to standard 135i hubs once the 1M body conversion has been done. cheers |
Appreciate
0
|
01-06-2015, 08:33 AM | #12 |
Major
195
Rep 1,181
Posts |
asn993 > On the conversion, I went with VMR 710's:
Front Size/Offset:19x9.5 ET22 > 265 tires Rear Size/Offset:19x11 ET26 > 275 tires If you absolutely want NO rubbing with these offsets, the 275's are perfect. 295's definitely rub, even with rolled fenders. Haven't tried 285's. |
Appreciate
2
|
01-06-2015, 02:48 PM | #13 |
ALL RIGHTY THEN
223
Rep 2,957
Posts |
awesome build!
__________________
BMW CCA Member 483866
|
Appreciate
0
|
01-27-2015, 04:47 PM | #15 |
First Lieutenant
95
Rep 307
Posts
Drives: 11' E82 S65 1M, 21' F95 X5MC
Join Date: Aug 2012
Location: Ponte Vedra, Florida
|
Again amazing write up! Will definitely be a huge help for my build... I had to make a change to my ECS order too with the negative battery cable for the exhaust/battery reloc! Glad you had that detailed otherwise I'd be scratching my head for a few days, haha.
__________________
'87 E30 M62 V8 6MT -- '11 E82 1M CLONE S65 6MT -- '21 F95 X5MC |
Appreciate
0
|
05-29-2015, 03:45 PM | #19 |
Private First Class
42
Rep 105
Posts |
I'm looking forward to doing this, and I'll be using your process as guide, but how hard would it be for an autoshop to do this? Did you go to any special one or just which ever one? I live i Puerto Rico and I haven't heard of a specialized body shop here, and no one has done a 1M conversion here
__________________
2009 135i e82 Alpine White N54 DNF
2012 M3 E92 Laguna Seca Blue S65 Toa Alta, Puerto Rico |
Appreciate
0
|
06-01-2015, 10:39 AM | #20 |
Major
195
Rep 1,181
Posts |
fjgregor > The key is to find a shop that has experience with wide-body and/or rear quarter collision work. They also need to be good at welding (fabricating too, but not required), and understand how corrosion/sealing works, etc.
An experienced shop should be able to do this for you -- but make sure you ask the questions and feel confident about their abilities beforehand. For the front, I recommend you do it yourself. It's not difficult and will save you tons of $$. The rear is hardest part of the project. |
Appreciate
0
|
06-01-2015, 01:26 PM | #21 |
Lieutenant
189
Rep 585
Posts |
A big thanks to TUN3D, following this guide and a few others, I've been able to carry out the 1M conversion on my car..
All the bodywork prep has been completed, just going in for painting tomorrow.
__________________
If its broke.. Mod it! if not, mod it anyway!
|
Appreciate
0
|
06-09-2015, 01:18 PM | #22 |
Colonel
173
Rep 2,346
Posts |
Hey I'm sure its been asked plenty of times, whats the cost to do the conversion? ball park 10k?
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|